Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.
The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.
The Match Grade barrel is precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
The barrel has 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done. Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality. Barrels are bead blasted to create a satin finish prior to plating and are available in 3 finish options.
The E-CTG9™ trigger group can be configured for Carry (Self Defense) or Competition (Target) use and comes complete with our improved trigger spring kit so you can set the ultimate trigger pull on your handgun.
The trigger housing features the SSR (Super Short Reset) 3.5Lb Connector that delivers the same trigger profile as the factory unit but is highly polished and reshaped to reduce friction and create a much smoother, lighter more consistent pull.
This connector makes super fast reset of the trigger possible, allowing for very quick follow up shots and reduced friction means less resistance for smooth operation.
The Trigger Bar is manufactured from a proprietary blend of 420 Stainless Steel and polished to produce an ultra smooth hard-wearing surface that reduces friction and trigger pull interference as it operates against the connector and internally against the pistol frame.
Springs are manufactured from the highest grade piano wire and tempered for the best service life. Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired. With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.
The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.
The Triggers Pivot Pin and Trigger Bar position has been carfully considered to deliver maximum leverage with minimum force and the hybrid bow face is a perfect blend of curved and flat surfacing that delivers comfort with improved erogonomics and finger positioning.
The bow is precision machined from certified 7075-T6 aluminum and hard coat anodized Type3 Class2 Black
Complete Features:
- GEN 4 Glock
- LANTAC RAZORBACK Slide
- RMR blanking plates with standard with Torx head screws
- LANTAC Match Grade Fluted barell
- Trijicon Bright & Tough tritium sights
- LANTAC GFP-E™lightened firing pin and 4.5lb striker spring
- LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,
- LANTAC stainless billet extractor
- LANTAC Guide Rod
- LANTAC E-CTG9 Trigger Group & Housing
- LANTAC Magwell
- LANTAC RAZORBACK Micro Stippling
- 45 Cuts & Stipple Index Strips
Product Specs | |
Action | Striker Fire |
Ammo Capacity | 15 Rounds |
Barrel Length | 102 mm / 4.02 in. |
Caliber | 9x19mm |
Color | Black |
Finish | DLC (Diamond Like Carbon) |
Frame Material | Polymer |
Front Sight | Trijicon Bright Tough tritium sights |
Grip | Polymer |
Overall Height | 127 mm / 4.99 in |
Overall Length | 185 mm / 7.28 in |
Overall Width | 30 mm / 1.18 in |
Rear Sight | Trijicon Bright Tough tritium sights |
Slide Material | Stainless Steel |
Trigger Pull | LANTAC 4.5 lbs |
Weight | 670 g / 23.65 oz |
LANTAC
LanTac ™ LLC is a company based in Great Britain but also in the USA and manufactures AR15 and Custom Glock with their accessories in accordance with the highest quality standards while holding multiple patents.