When we decided to make a direct impingement rifle, it couldn’t be another “me-too” carbine. The Renegade + embodies everything a direct impingement AR-15 can be. With improvements such as our roller cam pin and patented heat sink barrel nut, these upgrades go well above mere aesthetics often found in rifles today. Put simply, the Renegade + addresses all of the weak points of the direct impingement system. The Dictator 9-position adjustable gas block gives you ultimate control of your rifle, whether tuning for ammo load or suppressor use. The straight gas tube eliminates heat build up from the weak points of standard gas tubes. And the roller cam pin ensures a smooth and more reliable relationship with the upper receiver.
The Renegade+ is built off of our Gen 4 billet lower receiver. This receiver is completely ambidextrous and includes our flat 3.5 lb match grade trigger with KNS Precision anti-walk pins. Competition ready right out of the box. Like the Renegade, the Renegade + comes with our M-LOK compatible Renegade rail, covering the 16.5” nitride heat treated barrel.
BUILT ON THE PATRIOT ORDNANCE FACTORY GEN 4 LOWER RECEIVER | |
The POF REVOLT Heavy is build on the Patriot Ordnance Factory GEN 4 Lower, a fully ambidextrous, Billet 7075 Aluminium, NP3 Coated, Receiver which boasts loads of enhancements:
| |
1) Ambidextrous Bolt Release with Enhanced Bolt Catch 2) Ambidextrous Safety Selector 3) Receiver Tension Screws 4) Oversized Mag Well Flare 5) Ambidextrous Recessed Finger Rest 6) Ambidextrous Magazine Release 7) Oversized Integrated Trigger Guard w/ Grip Relief 8) Ambidextrous Bolt Hold Open 9) Available QD Rear Sling Mount 10) KNS Anti-Walk Pins | |
E2 DUAL-EXTRACTION TECHNOLOGY | |
POF’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case.
This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear.
|
ADJUSTABLE GAS SYSTEM | |
| |
| The DIctator Adjustable Gas Block lets you tune your rifle to the exact operating speed it should be. When your rifle runs too slow, or too fast, it’s more prone to failures. With the DIctator’s 9 adjustable settings and included straight gas tube, you and your rifle are set for just about any situation. So go ahead and suppress it, run different ammo, or don’t. Experience a smoother shooting rifle than ever before. To adjust, use a flat head screwdriver or the included tool. | |
MODULAR RAILED RECEIVER | |
 | |
The patented Modular Railed Receiver (M.R.R) is POF’s crown jewel for precision and extreme rigidity. This is a two piece upper assembly with a free-floating monolithic handguard that slides on and interfaces directly to the upper assembly thanks to our upper’s reinforced backbone. This backbone is five-times thicker than standard flattop platforms. The suspended handguard keeps your grip and accessories from weighing on the barrel and with the help of our wedge block, reduces stress and flex in the barrel extension area. This ensures both extreme rigidity and accuracy by directing stress risers toward the upper assembly’s strongest, most reinforced materials. | |
NITRIDE HEAT-TREATED FLUTED BARREL & 3 PORT MUZZLE BRAKE | |
NITRIDE HEAT-TREATED BARRELProper gas regulation and lubricated mechanics are nothing without the precision and durability of a quality barrel. The chrome alloy barrels are machined for absolute accuracy. The barrels are nitride heat-treated for full corrosion resistance. | TRIPLE PORT MUZZLE BRAKEDesigned to precisely compliment the POF platform our nitride heat-treated muzzle brake controls gas dispersion and reduces muzzle rise. It is effective in allowing the shooter to have faster follow up shots and has unbelievably soft felt recoil. It features blunt strike prongs and includes our nitride heat-treated collar jam nut. |
OVERSIZED HEAT SINK BARREL NUT | |
 | |
The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. The barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. The enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly. | |
BOLT CARRIER GROUP & ROLLER CAM PIN | |
BOLT CARRIER GROUPThe one piece NP3 plated bolt carrier is manufactured with the mechanical key built into the body and positioned behind the cam pin. This patented design helps reduce carrier tilt. The bolt carrier group features a chrome plated bolt, extractor, and firing pin. The finishes are both corrosion resistant and introduce lubricious characteristics to the action. | Roller Cam PinThe patented roller cam pin is just one more example of how POF strives to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.
|
ANTI-TILT BUFFER TUBE | |
 | |
| The mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes. | |
FIND OUT MORE ABOUT PATRIOT ORDNANCE FACTORY | ||
| Product Specs | |
| Action | Semi-Auto |
| Barrel Length | 12.5" |
| Caliber | .223 / .556 |
| Capacity | MULTI |
| Color | Black |
| Finish | Available in: Black anodized / Burnt bronze |
| Front Sight | N/A |
| Gas System | Direct Impingement |
| Overall Length Collapsed | 27” / 68.58cm |
| Overall Length Extended | N/A |
| Rear Sight | N/A |
| Rifle Lower | Billet Steel |
| Rifle Upper | Billet Steel |
| Special Purpose | Carbine |
| Weight | 6 lbs / 2.7kg |
POF USA
Patriot Ordnance Factory (POF-USA) manufactures and distributes law enforcement, military and civilian rifles in Phoenix, Arizona, and was the first manufacturer and seller of gas-piston-operated weapon systems on AR-style rifles in the United States. POF-USA was founded in 2002 by aerospace engineer Frank DeSomma with the intent of solving the most common problems with gas impingement AR15 systems. The company now holds numerous patents and awards for their products.
