Brand:
NightHawk Custom
Product Code:
NH-SP0086
This revolutionary recoil system uses a flat wire recoil spring, special guide rod and plug that allows shooters to shoot a minimum of 15,000 rounds before the need to change recoil springs.There are other benefits to changing to this recoil system as well. One of the key benefits is how it handles ..
77.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0351-M
Our new Tool Steel Slide Stop is cut from solid bar stock and hardened to insure a lifetime of flawless performance. This fully machined part is unrivaled in the 1911 world because of the quality of machining and the close tolerances it is held to during the machining process.
Part Number: SP0351..
88.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0091
Precisely sized to prevent primer flow. Available in 45 acp or 38/9mm. (Nighthawk Custom® guns use the 38/9mm.)
Part Number: SP0091..
46.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0354-M
Our new Tool Steel Slide Stop is cut from solid bar stock and hardened to insure a lifetime of flawless performance. This fully machined part is unrivaled in the 1911 world because of the quality of machining and the close tolerances it is held to during the machining process.
Part Number: SP0354..
91.95€
Brand:
NightHawk Custom
Product Code:
NH-SP0330
The Nighthawk plunger tube is machined from solid bar stock.
Part Number: SP0330..
20.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0352-M
Our new Tool Steel Slide Stop is cut from solid bar stock and hardened to insure a lifetime of flawless performance. This fully machined part is unrivaled in the 1911 world because of the quality of machining and the close tolerances it is held to during the machining process.
Part Number: SP0352..
91.95€
Brand:
NightHawk Custom
Product Code:
NH-SP0403
It’s a good idea to change your firing pin spring every 5,000 rounds to insure proper ignition and have enough tension on the firing pin for safety reasons.
An extra power spring is a safety feature to have in your 1911 in case of an accidental drop. The double extra power spring is recommended whe..
4.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0171
Available in Government or Commander size, they require little or no gunsmithing and usually just drop in as a replacement part. The guide rod may have to be trimmed in length to fit as needed.
Part Number: SP0171..
53.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0075
Our Disconnector is the same one we use on all of our custom 1911s. It is an integral part of a great trigger job, and paramount to the safety of the firearm. CNC machined from billet and hardened to maintain its integrity and provide you the part you need to build the perfect 1911.
*Gunsmith fitti..
55.00€
Brand:
NightHawk Custom
Product Code:
NH-SP0401
This is a spring kit that that will come in handy. It has two standard recoil springs, an extra power spring for +P, a reduced power hammer spring, and an extra power firing pin spring.
Part Number: SP0401..
32.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0404
On most Government (5") size guns, we suggest you use a 17# to 18.5# spring for standard factory ammunition (2,000 rounds). If you plan on having an extended shooting session using hot or +P ammo, then opt for the 20# spring. It works well on ammunition like Winchester Lawman. If you want to shoot s..
11.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0225-C
Machined from a solid billet of steel, this is ideal for a replacement part or a new custom build. The length is a little longer than the standard version which makes for faster magazine changes. Where the body makes contact with the magazine has been widened to allow the magazines to drop freely
..
45.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0299
NightHawk complete pin set complete with mainspring caps and pins. Available in Government and Officer size.
Part Number: SP0299..
32.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0210
CNC machined from bar stock, it has a generous radius already incorporated where it rests proportionately into the mainspring housing cap pin.
*Gunsmith fit required
Part Number: SP0210..
30.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0350-1
The heart of a trigger job is the sear. Our sear is cut from solid bar stock, not cast, and is fully machined and hardened. It requires qualified gunsmith installation.
*Gunsmith fitting required.
Part Number: SP0350-1..
51.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0090
Precisely sized to prevent primer flow. Available in 45 acp or 38/9mm. (Nighthawk Custom® guns use the 38/9mm.)
Part Number: SP0090..
22.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0419
Spring, 22# Flat Wire Recoil, For 1911 Everlast Recoil System, 45 ACP, ...
Part Number: SP0419-1..
15.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0079
A key component to reliability is a good extractor. NightHawk is made from hardened tool steel and should last you for thousands of rounds.
Minor fitting may be required.
Part Number: SP0079..
54.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0399
This is a spring kit that that will come in handy. It has two standard recoil springs, an extra power spring for +P, a reduced power hammer spring, and an extra power firing pin spring.
Part Number: SP0399..
32.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0300
NightHawk complete pin set complete with mainspring caps and pins. Available in Government and Officer size.
Part Number: SP0300..
22.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0020
When installing a barrel, you need the best barrel links. NighHawk barrel links are cut from solid 416 stainless steel and fully machined. Offered as a set of five.
*Gunsmith fitting required.
Part Number: SP0020..
45.90€
Showing 1 to 22 of 22 (1 Pages)