Brand:
Wilson Combat
Product Code:
860
The Tactical Adjustable Battlesight for 1911’s makes quickly adjusting your 1911 pistol's elevation a simple task. This streamlined, low-profile sight fits the standard Wilson Combat Battlesight dovetail and locks into place with two massive set screws. The machined steel blade pivots on a har..
152.90€
Brand:
Wilson Combat
Product Code:
367FOR190
Low-profile front sights with high visibility dots greatly enhance the eye's ability to find the front sight for fast target acquisition and consistent accuracy. Fiber Optic- red or green fiber optic rods.
.190" Height
Red Fiber Optic (.0585" Diameter)
.300" x 60° Dovetail..
65.00€
Brand:
Wilson Combat
Product Code:
2B
The SHOK-BUFF® prevents the slide from battering the frame during recoil by sandwiching a 1/10" thick poly fiber buffer between the slide and frame contact areas. When you are shooting high performance loads in your 1911 style pistol, you want the extra protection that the original SHOK-BUFF® provid..
14.90€
Brand:
Wilson Combat
Product Code:
34E
A combat pistol must reliably eject spent cases every time. Wilson Combat Extended Combat Ejectors are designed to give optimal case clearance and endure the constant pounding of even the hottest loads. These Ejectors are fully machined from 4130 bar stock and heat treated for maximum durability. If..
59.00€
Brand:
Wilson Combat
Product Code:
WC-417
Spring, Deluxe Sear
Fits: All Codes (Except L)
Pkg Includes: Sear Spring
Producing a quality sear spring is quite tricky since it must be bent for custom tuning yet maintain a constant tension once set. A Bullet Proof® Sear Spring has the perfect balance of materials and temper to ..
25.00€
Brand:
Wilson Combat
Product Code:
10G10
Recommended Use: Full-Size 5" 9mm or .38 Super shooting extremely light target ammunition with a power factor of 125,000 to 135,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 4,000 Rounds
Wilson Combat Heavy-Duty Recoil Springs are made combat tough to repeatedly take a pound..
14.90€
Brand:
Wilson Combat
Product Code:
10G9
Recommended Use: Full-Size 5" 9mm or .38 Super shooting extremely light target ammunition with a power factor of 115,000 to 120,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 4,000 Rounds
Wilson Combat Heavy-Duty Recoil Springs are made combat tough to repeatedly take a pound..
14.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0086
This revolutionary recoil system uses a flat wire recoil spring, special guide rod and plug that allows shooters to shoot a minimum of 15,000 rounds before the need to change recoil springs.There are other benefits to changing to this recoil system as well. One of the key benefits is how it handles ..
77.90€
Brand:
Wilson Combat
Product Code:
10G15
Recommended Use: Full-Size 5" .38 Super +P shooting full charge target or self-defense ammunition or .45 ACP shooting 185 gr. JHP or target ammunition with a power factor of 140,000 to 165,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 4,000 Rounds
Wilson Combat Heavy-Duty Re..
14.90€
Brand:
Wilson Combat
Product Code:
10G16
Recommended Use: Full-Size 5" .45 ACP shooting 185 gr. / 200 gr. standard pressure target or JHP self-defense ammunition with a power factor of 145,000 to 170,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 4,000 Rounds
Wilson Combat Heavy-Duty Recoil Springs are made combat t..
14.90€
Brand:
Wilson Combat
Product Code:
399B,70
A Bullet Proof firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a factory firing pin stop.
A quality firing pin stop should fit snugly in place, therefore this part does require minor fittin..
39.00€
Brand:
Wilson Combat
Product Code:
10G12
Recommended Use: Full-Size 5" 9mm shooting full charge ammunition or .38 Super / .45 ACP shooting target ammunition with a power factor of 130,000 to 150,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 4,000 Rounds
Wilson Combat Heavy-Duty Recoil Springs are made combat tough ..
14.90€
Brand:
Wilson Combat
Product Code:
WC-684B
Standard thickness grip screw bushings are a direct replacement for one that is damaged or stripped during use.
Note: Most factory installed bushings require removal of rear staking for new bushing installation. Re-staking or loctite 271 are acceptable ways to secure your new bushing in the fram..
14.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0351-M
Our new Tool Steel Slide Stop is cut from solid bar stock and hardened to insure a lifetime of flawless performance. This fully machined part is unrivaled in the 1911 world because of the quality of machining and the close tolerances it is held to during the machining process.
Part Number: SP0351..
88.90€
Brand:
Wilson Combat
Product Code:
659S
The ultimate thumb safety for your carry gun, the Wilson Combat Tactical Bullet Proof® thumb safety is perfectly shaped for everyday use and precision machined from a solid block of hardened billet steel. The safety shaft is cut to maximum dimensions for a snug fit in even the most oversize 1911.
..
99.00€
Brand:
Wilson Combat
Product Code:
10G13
Recommended Use: Full-Size 5" 9mm +P or .38 Super shooting full charge target or self-defense ammunition or .45 ACP shooting target ammunition with a power factor of 130,000 to 150,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 4,000 Rounds
Wilson Combat Heavy-Duty Recoil Spr..
14.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0091
Precisely sized to prevent primer flow. Available in 45 acp or 38/9mm. (Nighthawk Custom® guns use the 38/9mm.)
Part Number: SP0091..
46.90€
Brand:
Wilson Combat
Product Code:
415-70S
When it comes to 1911 reliability, the extractor is the most important component part of your 1911 handgun. A well-designed, properly tuned extractor ensures that your pistol feeds, extracts and ejects reliably every time.
All Wilson Combat Bullet Proof ® Extractors are machined from solid bar st..
65.00€
Brand:
Wilson Combat
Product Code:
846MS
Recommended Use: EDC X9
NOTE: This is the hammer spring we install in our EDC X9 pistols...
6.90€
Brand:
Wilson Combat
Product Code:
738-FS-BB-GB
These precision machined G-10 grips are impervious to the elements and will hold up to extreme use. If the texture is too sharp for your hands, a light polish with 320 grit sandpaper with tone down their traction to your preferred level of traction.
Size / Fits
Full-Size 1911 (Governmen..
99.00€
Brand:
NightHawk Custom
Product Code:
NH-SP0330
The Nighthawk plunger tube is machined from solid bar stock.
Part Number: SP0330..
20.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0354-M
Our new Tool Steel Slide Stop is cut from solid bar stock and hardened to insure a lifetime of flawless performance. This fully machined part is unrivaled in the 1911 world because of the quality of machining and the close tolerances it is held to during the machining process.
Part Number: SP0354..
91.95€
Brand:
Wilson Combat
Product Code:
614G20
Recommended Use: Full-Size 5" 10mm shooting target ammunition or .45 ACP shooting +P JHP self-defense ammunition with a power factor of 180,000 to 200,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 40,000 Rounds
The longest lasting handgun recoil spring made - our testing has..
24.90€
Brand:
Wilson Combat
Product Code:
856
Wilson Combat replacement EDC9/EDC X9 / SFX9 extractor pin & spring
This .050” hex head pin retains the EDC 9/EDC X9 spring loaded external extractor and is threaded into the slide to lock the extractor into place.
This threaded pin is a good spare part to keep in case of loss or breakage.
It..
26.90€