Brand:
LANTAC
Product Code:
GP-GR17-NIT
Upgrade Flared Head, Non Captive Guide rods.Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.Available in Stainless & QPQ Nitride coating.Flared head creates a more concentric and consistent lock up of the slide, spring & rod.Fits all Gen 1-3 17..
44.93€
59.90€
Brand:
LANTAC
Product Code:
GP-GR-19-NIT
Upgrade Flared Head, Non Captive Guide rods. Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.Available in Stainless & QPQ Nitride coating.Flared head creates a more concentric and consistent lock up of the slide, spring & rod.Fits all Gen 1-3 1..
44.93€
59.90€
Brand:
APEX Tactical
Product Code:
116-115
DetailsThe Action Enhancement Kit for CZ P-10 pistols features the Apex Action Enhancement Trigger paired with an Apex Performance Disconnector and an Apex Slide Cover Plate. The kit offers two trigger pull options depending on which disconnector is installed.When using the Apex Performance Disconne..
182.00€
Brand:
GHOST Inc
Product Code:
GHO_2105-E
The GHOST ULTIMATE is the one trigger connector made for GLOCKS® that makes your semi-automatic GLOCK pistol more reliable. It does this because of the "HOLES". The connectors holes lessen the friction inherent in the GLOCK trigger mechanisms, and removes debris from the trigger mechanism, maki..
45.00€
Brand:
GHOST Inc
Product Code:
GHO_GCSCK
THE GHOST COMPLETE SPRING KIT Gen 1-5- Note: Trigger spring is not used on Gen 5 Pistols
THIS KIT PROVIDES ALL THE SPRINGS NEEDED FOR YOU TO ADAPT YOUR TRIGGER PULL WEIGHTS FOR EITHER SPORT SHOOTING OR SELF-DEFENSE APPLICATIONS.
Please Note: The 4.0 lb Firing Pin Spring included in the kit is for ..
24.90€
Brand:
Shield Arms
Product Code:
SA-G43-EMR-BLK
Our steel mag catch is optimized to work with the Shield Arms Z9 magazine. While it remains compatible with plastic OEM magazines, it can cause increased wear on plastic mags with prolonged use. We recommend steel on steel or plastic on plastic.
Features
Steel mag catch..
46.90€
Brand:
LANTAC
Product Code:
01-GP-45-USS
Upgrade Spring Kits, available in 4 different spring strengths.x1 4.5lb Firing Pin Springx1 6.0Lb Increased Power Trigger Springx1 Reduced Power Firing Pin Safety SpringSprings are manufactured from the highest grade piano wire and tempered for the best service life. Each spring is calibrated t..
20.93€
27.90€
Brand:
Vickers Tactical
Product Code:
GMR004
Anyone with average- to small hands now can easily perform magazine changes without shifting their firing grip on the weapon. The VT GMR-004 is easy to install, and made of the same tough polymer as the Glock™ factory part. The GMR-004 eliminates having to shift your grip to manipulate the OEM ..
39.90€
Brand:
GHOST Inc
Product Code:
GHO_GPG4X2
Included are two plugs. One to be used with the back strap and another to be used without the back strap.
The drop-in GHOST Grip Plugs are designed so that you can operate your Glock in a hostile environment, without the possibility of pistol fouling debris entering your pistol's mechanism through ..
20.00€
Brand:
Vickers Tactical
Product Code:
GMR-002
Anyone with average- to small hands now can easily perform magazine changes without shifting their firing grip on the weapon. The VT GMR-002 is easy to install, and made of the same tough polymer as the Glock® factory part.The extended catch is just perfect…not too short, not too long, i.e. the maga..
36.00€
Brand:
Brownells
Product Code:
02-2004-06-03
New and improved kit now comes with a billet firing pin. Contains all the parts you need to complete the innards of an aftermarket slide or refurbish a factory slide to like-new standards. All the parts in our Glock®17® Gen 3 OR Gen 5 Slide Parts Kit are aftermarket parts made to the correct dimensi..
109.90€
Brand:
GHOST Inc
Product Code:
GHO_42-43_2424_V_1
The Edge is the best self-defense drop-in connector made for the GLOCK 42 & 43!The GHOST EDGE is the evolution of the drop-in style trigger connector. This is the best drop-in self-defense trigger connector for your Glock 42 & 43 semi-auto pistol.We keep improving our trigger connectors to m..
42.00€
Brand:
Brownells
Product Code:
02-2004-00-02
New and improved kit now comes with a billet firing pin. Contains all the parts you need to complete the innards of an aftermarket slide or refurbish a factory slide to like-new standards. All the parts in our Glock®17® Gen 3 OR Gen 5 Slide Parts Kit are aftermarket parts made to the correct dimensi..
96.90€
Brand:
GHOST Inc
Product Code:
GH0_GP42-43
The Ghost G42/G43 PLUG is designed to block debris from entering your pistol's mechanism through the grip opening behind the magazine well. Installation is easy, simply install the plug by pushing it into the heel opening of the grip body. The plug is held in place with friction fit. DISCL..
14.00€
Brand:
Overwatch Precision
Product Code:
26322
The Overwatch Precision Large Frame 45/10mm TAC Trigger is a flat-faced, direct drop-in replacement for your OEM trigger. Each trigger shoe and trigger safety tab is machined in the USA out of 7075-T6 aluminum alloy, and affixed to an NP3 plated, OEM trigger bar by 316 stainless steel coil spri..
232.00€
Brand:
Pearce Grips
Product Code:
PGG4SC
This unit installs in the bottom rear cavity of the frame utilizing a friction fit for retention. Fits model 26, 27 and 33. This product will only fit Generation 4&5 frames. Allows for use of factory interchangeable backstraps.Key benefitHelps keep debris out of the magazine well.DISCLAIMER: Thi..
11.00€
Brand:
Brownells
Product Code:
02-2004-05-03
New and improved kit now comes with a billet firing pin. Contains all the parts you need to complete the innards of an aftermarket slide or refurbish a factory slide to like-new standards. All the parts in our Glock®17® Gen 3 OR Gen 5 Slide Parts Kit are aftermarket parts made to the correct dimensi..
109.90€
Brand:
Brownells
Product Code:
02-2004-02-04
Contains all the parts you need to complete the innards of an aftermarket slide or refurbish a factory slide to like-new standards. All the parts in our Glock 43/43x/48 Slide Parts Kit are aftermarket parts made to the correct dimensions for proper fit, finish, and function in a factory spec slide. ..
109.00€
Brand:
Vickers Tactical
Product Code:
GMR-001
Anyone with average- to small hands now can easily perform magazine changes without shifting their firing grip on the weapon. The VT GMR-001 is easy to install, and made of the same tough polymer as the Glock™ factory part.
The GMR-001 eliminates having to shift your grip to manipulate the OEM..
36.00€
Brand:
Strike Industries
Product Code:
SI-GSP-V2-BLK
The SI Slide Cover Plate for GLOCK allows for tool-less disassembly of the firing pin and extractor using a (patent-pending) push-button design for greater ease of maintenance. Machined from aircraft grade aluminum and anodized, the SI Slide Cover Plate is significantly more durable than the factory..
36.00€
Brand:
Brownells
Product Code:
02-2004-01-02
New and improved kit now comes with a billet firing pin. Contains all the parts you need to complete the innards of an aftermarket slide or refurbish a factory slide to like-new standards. All the parts in our Glock®17® Gen 3 OR Gen 5 Slide Parts Kit are aftermarket parts made to the correct dimensi..
99.00€
Brand:
Strike Industries
Product Code:
SI-MC-QUAD
The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2"x28 Threads Per Inch (TPI). The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing ha..
116.00€
Brand:
Wilson Combat
Product Code:
700B
The Wilson Combat SHOK-BUFF® for the Beretta 92 prevents the slide from battering the frame during recoil by sandwiching a 1/10" thick injection molded polymer buffer between the slide and frame contact surfaces. When shooting high performance loads in your Beretta 92 style pistol, you will want the..
15.00€
Brand:
Strike Industries
Product Code:
SI-G5-MAGWELL-19
The Strike Industries GEN5 Magwell for GLOCK™ G19 was designed to provide easier reloading of the magazine while adding SI styling. With the added front lip of the magwell, this SI magwell gives improved grip support. Keeping to the slender factory design of the pistol grip, the benefit of adding a ..
32.00€