Brand:
POF USA
Product Code:
00741
The Inseparable Pivot Pin Kit is used to permanently attach both upper and lower receivers on AR style rifle. As a result of new state compliancy issues, this kit was developed to keep the rifle pinned together...
46.90€
-20x20.jpg "Triggertech AR15 - Diamond Black Flat, Adaptable 1.5-4Lbs, Single Stage"){kind=small}
-496x496.jpg "Triggertech AR15 - Diamond Black Flat, Adaptable 1.5-4Lbs, Single Stage")
Brand:
TriggerTech
Product Code:
AR0-SAB-14-NNF
To develop a TriggerTech Single-Stage AR15 trigger we started with our proven Two-Stage AR platform that has been in the field since 2016 and combined it with a serious amount of ingenuity from our engineering department. While it was initially viewed as not possible, our team of engineers developed..
383.00€
Brand:
Talon Grips
Product Code:
Glock-DLo116
This rear wrap grip is available in both granulate and rubber textures. This grip has full coverage on the side panels below the thumb rest, ample coverage on the backstrap, and three finger wraps for the finger groves under the trigger guard. This grip was designed for Gen3, but will fit Gen2 and G..
42.90€
Brand:
Magpul
Product Code:
MAG1377-BLK
The DT Carbine Stock is a drop-in replacement buttstock for AR15/M16/M4 carbines (or comparable platforms) equipped with Mil-Spec profile receiver extensions. It merges the best features of the SL and CTR product lines with its new dual tensioning technology, which provides greater strength and secu..
109.90€
Brand:
Strike Industries
Product Code:
SI-MC-QUAD
The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2"x28 Threads Per Inch (TPI). The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing ha..
116.00€
Brand:
POF USA
Product Code:
00898
The Nylon Tension Screw allows users to fine tune the fit of their upper with our Lower Receivers. Achieve a tight fit with any standard AR15 upper receiver by inserting the screw into the grip tang of our Lower Receiver and tightening against the upper receiver until there is no wobble between the ..
7.00€
Brand:
POF USA
Product Code:
01853
This Drop In Trigger Repair Kit includes a brand new disconnect, disconnect spring, hammer spring, and trigger spring.The Drop In Trigger Repair Kit is intended to repair all single stage semi-auto POF-USA drop in triggers.The triggers this unit is compatible whit are:Single Stage CurvedSingle Stage..
38.00€
Brand:
Mec-Gar
Product Code:
MGPB9613AFC
Caliber .40 S&WCapacity 13 High Cap Flush FitIncreased capacity to 13-rounds while remaining flush-fitRedesigned tube to improve functionality, heat-treated for strengthAnti-Friction Coating allows for easy loading and superior anti-corrosion propertiesInterlinked internal components..
50.00€
Brand:
POF USA
Product Code:
00904
The Regulator Wrench is used to quickly adjust your Dictator Gas Block...
16.00€
Brand:
POF USA
Product Code:
00666
The Ambi Selector Switch from POF-USA is an instant upgrade. As a result, it easily installs in any of your favorite Mil-Spec AR's. The Ambi Selector Switch was designed to maximize ergonomics and efficiency right out of the box. Once installed, you will need to attached the right side lever using a..
47.00€
Brand:
POF USA
Product Code:
00944
POF-USA Extractors are available in 2 sizes. The 5.56 Extractor will fit all MIL-SPEC 5.56 NATO bolts. The 308 extractor is designed for use on our P308 rifle and most AR10 rifles...
47.00€
Brand:
Wilson Combat
Product Code:
417
Spring, Deluxe SearFits: All Codes (Except L)Pkg Includes: Sear Spring Producing a quality sear spring is quite tricky since it must be bent for custom tuning yet maintain a constant tension once set. A Bullet Proof® Sear Spring has the perfect balance of materials and temper to allow the pisto..
18.00€
Brand:
Brownells
Product Code:
MSC-SCK001-BK
Multipurpose elastic cord to attach gear to your equipment such as radio antennas, Tourniquet (TQ), clothing etc.The two included cord-locks can be used to tighten and lock the cord for safety. DETAILSPackage Includes:- 1 x Shock Cord- 2 x Cord-Lock TECH SPECS- Shock Cord Length: 1 mt / 3,..
15.00€
Brand:
POF USA
Product Code:
00943
POF-USA Extractors are available in 2 sizes. The 5.56 Extractor will fit all MIL-SPEC 5.56 NATO bolts. The 308 extractor is designed for use on our P308 rifle and most AR10 rifles...
52.00€
Brand:
APEX Tactical
Product Code:
119-125-C
DetailsApex originated the drop-in trigger kit for the FN 509. The patent-pending design of the Action Enhancement Trigger Kit for the FN 509 (with Flat-Faced Trigger) makes a huge difference in the trigger pull characteristics and immediately became a must-have for 509 owners. When installed, this ..
249.00€
Brand:
Pearce Grips
Product Code:
PGG4MF
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits model M17, 18, 19, 22, 23, 24, 31, 32, 34, 35, 37, 38 and 45. This product will only fit Generation 4 and 5 frames. Allows for use of factory interchangeable backstraps.(Will not fit 20, 21, 40 a..
13.00€
Brand:
Wilson Combat
Product Code:
34E
A combat pistol must reliably eject spent cases every time. Wilson Combat Extended Combat Ejectors are designed to give optimal case clearance and endure the constant pounding of even the hottest loads. These Ejectors are fully machined from 4130 bar stock and heat treated for maximum durability. If..
55.00€
Brand:
Mec-Gar
Product Code:
MGP22617B
Caliber 9 mmCapacity 17 High Cap Flush FitIncreased capacity to 18-rounds while remaining flush-fitRedesigned tube to improve functionality, heat-treated for strengthAnti-Friction Coating allows for easy loading and superior anti-corrosion propertiesInterlinked internal components..
42.90€
Brand:
Magpul
Product Code:
MAG595
The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times.The MagLink features a two-piece bolt on design and durable, lightweight..
29.90€
Brand:
Magpul
Product Code:
MAG523-BLK
A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control.With a one-piece reinforced polymer construction and compatibility with Magpul Grip Cores for storage customization, this MOE grip pro..
30.90€
Brand:
POF USA
Product Code:
00740
The Inseparable Pivot Pin Kit is used to permanently attach both upper and lower receivers on AR style rifle. As a result of new state compliancy issues, this kit was developed to keep the rifle pinned together...
41.90€
![Wilson Combat Recoil Spring, 5" Full-Size, 10 Lb.](https://www.talosdefense.com/image/cache/catalog/products/1/0/10g17_1-20x20.jpg "Wilson Combat Recoil Spring, 5" Full-Size, 10 Lb."){kind=small}
![Wilson Combat Recoil Spring, 5" Full-Size, 10 Lb.](https://www.talosdefense.com/image/cache/catalog/products/1/0/10g17_1-496x496.jpg "Wilson Combat Recoil Spring, 5" Full-Size, 10 Lb.")
![Wilson Combat Recoil Spring, 5" Full-Size, 10 Lb.](https://www.talosdefense.com/image/cache/catalog/products/w/i/wilson-combat-logo_1_1-496x496.jpg "Wilson Combat Recoil Spring, 5" Full-Size, 10 Lb."){kind=logo}
Brand:
Wilson Combat
Product Code:
10G10
Recommended Use: Full-Size 5" 9mm or .38 Super shooting extremely light target ammunition with a power factor of 125,000 to 135,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 4,000 RoundsWilson Combat Heavy-Duty Recoil Springs are made combat tough to repeate..
14.90€
Brand:
Strike Industries
Product Code:
SI-G5-MAGWELL-19
The Strike Industries GEN5 Magwell for GLOCK™ G19 was designed to provide easier reloading of the magazine while adding SI styling. With the added front lip of the magwell, this SI magwell gives improved grip support. Keeping to the slender factory design of the pistol grip, the benefit of adding a ..
32.00€
Brand:
Magpul
Product Code:
MAG579
Compatible with short action AICS-spec bottom metal to include the Bolt Action Magazine Well for the Hunter 700 Stock, the PMAG 10 7.62 AC brings additional capacity in an affordable and reliable package. Featuring GEN M3™ technology, a paint-pen dot matrix for visual identification, ..
72.90€