Brand:
Wilson Combat
Product Code:
399B,80
A Bullet Proof firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a factory firing pin stop.
A quality firing pin stop should fit snugly in place, therefore this part does require minor fittin..
38.00€
Brand:
Wilson Combat
Product Code:
614G17
Recommended Use: Full-Size 5" .45 ACP shooting 230 gr. hardball equivalent or standard pressure JHP self-defense ammunition with a power factor of 175,000 to 195,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 40,000 Rounds
The longest lasting handgun recoil spring made - our ..
25.00€
Brand:
NightHawk Custom
Product Code:
SP0403
It’s a good idea to change your firing pin spring every 5,000 rounds to insure proper ignition and have enough tension on the firing pin for safety reasons.An extra power spring is a safety feature to have in your 1911 in case of an accidental drop. The double extra power spring is recommended when ..
4.90€
Brand:
Wilson Combat
Product Code:
851L-BLK
Factory Replacement Backstrap for the EDC X9 defensive handgun.
Adds approximately .100” to grip diameter for larger handed shooters.
User replaceable with no fitting required.
7075-T6 Aluminum construction with black hard anodized finish...
149.00€
Brand:
Ruger
Product Code:
90599
E-nickel, 10-Round, .22 caliber magazine fits the Ruger® Mark IV™ 22/45™ and Mark IV™ 22/45 Lite®. Genuine Ruger® Factory Accessory..
58.00€
Brand:
Ruger
Product Code:
90231
E-nickel, 10-round, .22 caliber magazine fits Ruger® Mark IV™ and Mark III™ pistols.Design is subject to change without notice. This magazine does not fit any of the Ruger® 22/45™ models...
52.00€
Brand:
Talon Grips
Product Code:
SmithandWesson-DLo704-Rubber
TALON Grips for Smith & Wesson M&P Compact. This front wrap grip is available in both granulate and rubber textures and offers full side panel coverage including the thumb rest area, full coverage under the trigger guard, and full coverage on the backstrap where the grip joins.This grip is s..
46.90€
Brand:
POF USA
Product Code:
01856
The Phoenix Ambi Mag Release is a repair or replacement ambi mag release for all Phoenix 9MM firearms and Tombstone 9MM firearms...
36.00€
Brand:
Elite Tactical Systems
Product Code:
SMK-HKMP5-30
NEW CARBON SMOKE MAG FEATURESFits the H&K MP5, MP5K, HK94, SP89, SP5KWorks with ETSCAM-RIFLE speed loaderExtremely reliable feeding - Even with hollow pointsFar lighter than steel magazinesFits standard MP5 mag pouches and couplersStandard 30 round capacityCompatible with all MP5 style 9mm firea..
49.00€
Brand:
Magpul
Product Code:
MAG1417
The TMAG 30 AR/M4 GEN M3 is a highly reliable, translucent, 30-round magazine for STANAG-compatible weapons chambered in 5.56x45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the..
45.00€
Brand:
Wilson Combat
Product Code:
320-SR
This unique part, designed by Wilson Combat engineers replaces the small and hard to reach factory P320 lo-profile slide catch levers.
Stamped from high quality ordnance steel, the deeply grooved and extended Wilson Combat SIG P320 extended slide release is uniquely shaped to improve your reloads u..
56.00€
Brand:
Magpul
Product Code:
MAG003
When installed on the base of a submachine-gun magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal.Patented design based up..
14.90€
Brand:
Wilson Combat
Product Code:
10G18
Recommended Use: Full-Size 5" 10mm shooting target ammunition or .45 ACP shooting 230 gr. hardball equivalent or standard pressure JHP self-defense ammunition with a power factor of 175,000 to 195,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 2,000 Roun..
19.00€
Brand:
NightHawk Custom
Product Code:
SP0352-M
Our new Tool Steel Slide Stop is cut from solid bar stock and hardened to insure a lifetime of flawless performance. This fully machined part is unrivaled in the 1911 world because of the quality of machining and the close tolerances it is held to during the machining process.Part Number: SP0352..
92.00€
Brand:
Daniel Defense
Product Code:
13-072-16539-006
The DD Magazine is the only AR-15 magazine worthy of the Daniel Defense name and is built with the same legendary quality and exacting standards as our world-class firearms. Its 32-round capacity for 5.56mm and 300 Blackout rounds is the most notable enhancement while maintaining the same size ..
45.00€
Brand:
Magpul
Product Code:
MAG532-BLK
The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15 / M4's that offers a more vertical grip angle, but in ..
36.90€
Brand:
Wilson Combat
Product Code:
10G17
Recommended Use: Full-Size 5" .45 ACP shooting 185 gr. / 200 gr. standard pressure target or JHP self-defense ammunition with a power factor of 160,000 to 175,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 3,000 RoundsWilson Combat Heavy-Duty Recoil..
14.90€
Brand:
Mec-Gar
Product Code:
MGCG4508SPF
Caliber .45Increased capacity of 8-rounds17-7 PH Stainless Steel tubeInternal components are linked together to offer easy disassembly and reassemblyLubricated nylon polymer follower with metal insert where the slide stop activates properly aligns all types of ammunition for the most reliable feedin..
54.00€
Brand:
NightHawk Custom
Product Code:
SP0075
Our Disconnector is the same one we use on all of our custom 1911s. It is an integral part of a great trigger job, and paramount to the safety of the firearm. CNC machined from billet and hardened to maintain its integrity and provide you the part you need to build the perfect 1911. *Gunsmith f..
45.00€
Brand:
NightHawk Custom
Product Code:
SP0299
NightHawk complete pin set complete with mainspring caps and pins. Available in Government and Officer size.Part Number: SP0299..
33.00€
Brand:
NightHawk Custom
Product Code:
SP0401
This is a spring kit that that will come in handy. It has two standard recoil springs, an extra power spring for +P, a reduced power hammer spring, and an extra power firing pin spring. Part Number: SP0401..
32.00€
Brand:
Radian Weapons
Product Code:
R0001
The Raptor ambidextrous charging handle by Radian is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum, the Raptor Ambidex..
146.00€
Brand:
Wilson Combat
Product Code:
573
Machined from tough alloy billet steel for a lifetime of function and wear resistance, this disconnector has been engineered to provide flawless function, enable light trigger pulls and to reduce drag on the slide.
Works best with our Bullet Proof® Ultralight hammers and deluxe Bullet Proof® Sear (..
55.00€
Brand:
Magpul
Product Code:
MAG549-BLK
The PMAG 5 7.62 AC is a reliable and durable polymer magazine for .308 Winchester-based family of cartridges and is compatible with short action AICS-spec bottom metal, to include the Bolt Action Magazine Well for the Hunter 700 Stock.Featuring GEN M3® technology, a paint-pen dot matrix for visual i..
63.90€